QUANTIFICATION OF IMPLEMENTATION MATURITY MEASUREMENT SYSTEMS BASED ON VBR: BIOMEDICAL, CHEMICAL AND BIOCHEMICAL APPLICATIONS

  • Алаа Наджи Дахал Альхуссейн Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0009-0005-2316-5347
  • Моххамад Р. Ради Information Technology Research and Development Centre, University of Kufa, Najaf, Iraq
  • Сергей Вячеславович Курынцев Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0003-0773-7251
  • Булат Ильгизярович Валеев Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0002-1643-4183
  • Тимур Артурович Аглиуллин Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0003-1043-7487
  • Олег Геннадьевич Морозов Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0003-4779-4656
  • Айрат Жавдатович Сахабутдинов Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0002-0713-7806
Keywords: fiber Bragg grating; fiber-optic sensors; biomedical measuring systems; chemical measuring sys-tems; biochemical measuring systems; functional coatings; biocompatibility; temperature com-pensation; maturity of implementation; laboratory verification; practical application.

Abstract

The second article in the series examines biomedical, chemical, and biochemical measurement systems based on fiber Bragg gratings (FBGs), focusing on their deployment maturity and practical limitations. These fields are characterized by high publication activity and a wide variety of sensing solutions; however, most proposed systems remain at the stages of laboratory validation or limited pilot testing. The analysis employs the five-level deployment maturity scale introduced in the first article of the series, which distinguishes conceptual developments, laboratory prototypes, pilot demonstrations, short-term deployment under real-world conditions, and long-term operation in actual service environments. The results show that FBG-based biomedical systems have considerable potential for physiological monitoring, rehabilitation, prosthetics, minimally invasive surgery, and biochemical diagnostics. However, their practical deployment is constrained by requirements for biocompatibility, miniaturization, sterilization, mechanical reliability, clinical validation, and long-term stability during actual use. Chemical and biochemical FBG-based systems, in turn, typically require functional coatings, transduction structures, or hybrid optical configurations, which improve sensitivity and selectivity but simultaneously complicate calibration, temperature compensation, and the maintenance of long-term response reproducibility. It is established that, for both application groups, the main barrier is not the fundamental measurement capability of FBGs themselves, but rather the transition from a sensitive laboratory sensing element to a stable, reproducible measurement system suitable for practical operation.

Author Biographies

Алаа Наджи Дахал Альхуссейн, Kazan National Research Technical University named after A.N.Tupolev-KAI

Postgraduate student at the Department of Radiophotonics and Microwave Technologies, Kazan National Research Technical University named after A.N. Tupolev‑KAI.

E‑mail:alkhusseyna@stud.kai.ru

Моххамад Р. Ради, Information Technology Research and Development Centre, University of Kufa, Najaf, Iraq

Research scientist, Information Technology Research and Development Centre, University of Kufa, Najaf, Iraq.

E-mail: mohammad@uokufa.edu.iq

Сергей Вячеславович Курынцев, Kazan National Research Technical University named after A.N.Tupolev-KAI

Candidate of Technical Sciences, Associate Professor at the Department of Materials Science, Welding and Occupational Safety  of KNRTU‑KAI.

SPIN code: 7946-7212.

E‑mail: SVKuryntsev@kai.ru

Булат Ильгизярович Валеев, Kazan National Research Technical University named after A.N.Tupolev-KAI

Аспирант кафедры радиофотоники и микроволновой технологии Казанского национального иследовательского технического университета им. А.Н.Туполева-КАИ.

SPIN-код: 4277-2798.

E-mail: BIValeev@kai.ru

Тимур Артурович Аглиуллин, Kazan National Research Technical University named after A.N.Tupolev-KAI

Candidate of Technical Sciences, Associate Professor at the Department of Radiophotonics and Microwave Technologies, Kazan National Research Technical University named after A.N. Tupolev‑KAI.

E-mail: taagliullin@kai.ru

Олег Геннадьевич Морозов, Kazan National Research Technical University named after A.N.Tupolev-KAI

Doctor of Technical Sciences, Professor at the Department of Radiophotonics and Microwave Technologies, Kazan National Research Technical University named after A.N. Tupolev‑KAI.

E-mail: OGMorozov@kai.ru

Айрат Жавдатович Сахабутдинов, Kazan National Research Technical University named after A.N.Tupolev-KAI

Doctor of Engineering Sciences, Professor in the Department of Radiophotonics and Microwave Technologies, Professor.

Author SPIN: 6370-3600.

Email: AZhSakhabutdinov@kai.ru

Published
2026-11-16
Section
Photonics