THERMALLY COMPENSATED SERIAL-PARALLEL DUAL-CHANNEL FRESNEL-BRAGG SENSOR FOR MONITORING THE CURING OF FLAT SHEET THERMOSET COMPOSITES

  • Олег Геннадьевич Морозов Казанский национальный исследовательский технический университет им. А.Н. Туполева - КАИ http://orcid.org/0000-0003-4779-4656
  • Геннадий Александрович Морозов Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0000-0002-9420-0710
  • Джердави Даххам Kazan National Research Technical University named after A.N.Tupolev-KAI
  • Иззат Алишеров Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0009-0005-2601-267X
  • Аида Зуфаровна Петрова Kazan National Research Technical University named after A.N.Tupolev-KAI http://orcid.org/0009-0009-5198-7240
  • Азат Ниязович Шарафутдинов Kazan National Research Techniсal University named after A.N.Tupolev http://orcid.org/0009-0007-9352-9489
  • Эдгар Васильевич Белов Kazan National Research Techniсal University named after A.N.Tupolev http://orcid.org/0009-0000-6320-6434
Keywords: thermosetting polymer composite materials, Fresnel sensor, Bragg sensor, addressable fiber Bragg structure, temperature, deformation, temperature compensation, microwave photonic in-terrogator, microwave processing complex

Abstract

A thermally compensated series-parallel dual-channel Fresnel-Bragg sensor is proposed for monitoring the curing of flat sheet thermosetting polymer composite materials (TSPCMs). Monitoring in the first channel is based on measuring the Fresnel reflectivity at the optical fiber/epoxy resin interface during probing with dual-frequency laser radiation generated in a phased two-component addressed fiber Bragg structure (AFBS). The refractive index of the epoxy resin changes at different stages of curing, resulting in a change in the Fresnel reflectivity. The curing state is determined by monitoring the change in reflected intensity at the beat frequency of the AFBS components. The phased AFBS also serves as a thermometer for temperature compensation in the first channel. Using two wavelength AFBS in the second channel helps separate temperature-induced crosstalk effects from deformation effects caused by resin curing. This is achieved by placing one wavelength AFBS within the epoxy resin and the second outside it in close proximity, allowing for the temperature of the processed TSPCM to be taken into account for temperature compensation in the second channel. A microwave photonic interrogator is used to process information in both channels for high accuracy AFBS interrogating. Experiments conducted in a resonator-horn microwave processing complex demonstrated the self-sufficiency of either channel. The goal is to use them comprehensively, provided the channels are constructed using different fiber types. This will allow for more effective separation of temperature-induced crosstalk effects from deformation effects, which is especially important when monitoring the curing of flat sheet TRPCMs while maintaining their shape.

Author Biographies

Олег Геннадьевич Морозов, Казанский национальный исследовательский технический университет им. А.Н. Туполева - КАИ

Doctor of Technical Sciences, Professor, Professor of the Department of Radiophotonics and Microwave Technology, KNRTU-KAI named after V.I. A.N. Tupolev Radio photonics, radio physics, applications in technical and living systems. SPIN-код: 4446-4570, AuthorID: 388026
ORCID https://orcid.org/0000-0003-4779-4656
Scopus Author ID: 7006896538
ResearcherID: G-3896-2015
E-mail: OGMorozov@kai.ru

Геннадий Александрович Морозов, Kazan National Research Technical University named after A.N.Tupolev-KAI

D.T.N., Professor, Professor of the Department of Radiophotonics and Microwave Technology at the A.N. Tupolev Kazan National Research Technological University-KAI. Research area: microwave technologies.

SPIN kod: 9607-7150.

E-mail: GAMorozov@kai.ru

Джердави Даххам, Kazan National Research Technical University named after A.N.Tupolev-KAI

Postgraduate student at Kazan National Research Technical University named after A.N. Tupolev-KAI.

Research interests: radiophotonics, microwave technologies, monitoring of microwave technological processes.

E-mail: dham.jardawi@mail.ru

SPIN-kod: 9237-3592

Иззат Алишеров, Kazan National Research Technical University named after A.N.Tupolev-KAI

Master of the Department of Radiophotonics and Microwave Technologies of the Kazan National Research Technical University named after A.N. Tupolev-KAI.

Research interests: fiber sensing for metrological support of microwave technological processes.

E-mail: izzat_0529@mail.ru

Аида Зуфаровна Петрова, Kazan National Research Technical University named after A.N.Tupolev-KAI

Senior Lecturer at the Department of Radiophotonics and Microwave Technologies at the Kazan Research Technical University named after A.N. Tupolev-KAI.
0009-0009-5198-7240
Research interests: radiophotonics, microwave technologies, and monitoring of microwave technological processes.

E-mail: aidochka91@mail.ru

Азат Ниязович Шарафутдинов, Kazan National Research Techniсal University named after A.N.Tupolev

Bachelor's student of the Kazan National Research Technical University named after A.N. Tupolev-KAI.

Email: sharafutdinovaz04@mail.ru

Эдгар Васильевич Белов, Kazan National Research Techniсal University named after A.N.Tupolev

Assistant Professor, Department of Radiophotonics and Microwave Technologies, KNITU-KAI named after A.N. Tupolev-KAI.

SPIN code: 9185-5105.

E-mail: EVBelov@kai.ru

Published
2026-05-07
Section
Photonics

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>