PIEZOELECTRIC VOLTAGE MEASUREMENT OF POLYCARBONATE USING THE AUTOGENERATING METHOD

  • Елена Андреевна Бобина Kazan National Research Techniсal University named after A.N.Tupolev
  • Сергей Алексеевич Карандашов Kazan National Research Techniсal University named after A.N.Tupolev
Keywords: Autogenerating method, piezoelectric effect, polycarbonate, piezo-voltage measurement.

Abstract

The article deals with the autogenerating method of measuring the piezoelectric voltage of polycarbonate. It is shown that the frequency range of autogenerators used to measure piezoelectric voltage lies within 4÷9 MHz. Experimental studies aimed at confirming the correctness of the simulation were carried out. It is shown that for controlling the strength limit of polycarbonate the frequency stability of the reference and measuring autogenerators ~10-2 is sufficient.

Author Biographies

Елена Андреевна Бобина, Kazan National Research Techniсal University named after A.N.Tupolev

Candidate of Technical Sciences, Associate Professor, Dept. EXPI Kazan National Research Technical University. A.N. Tupolev-KAI.

E-mail: lemurik1@gmail.com

Сергей Алексеевич Карандашов, Kazan National Research Techniсal University named after A.N.Tupolev

Leading Engineer of the Interdisciplinary Interuniversity Laboratory of the Kazan National Research Technical University. A.N. Tupolev-KAI.

E-mail: seregak2005@yandex.ru 

Published
2023-02-02
How to Cite
Бобина, Елена, & Карандашов, Сергей. (2023, February 2). PIEZOELECTRIC VOLTAGE MEASUREMENT OF POLYCARBONATE USING THE AUTOGENERATING METHOD. Electronics, Photonics and Cyberphysical Systems, 2(4), 49-54. Retrieved from http://elphotkai.ru/article/view/498
Issue
Vol 2 No 4 (2022): Achievements of Youth: Women in Science
Section
Achievements of Youth: Women in Science
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)